Main Features
- Protection cabinet with several automatic locking access doors to ensure unparalleled safety and clean operation in laboratory environments.
- Intelligent system with adjustable limit switches allow for repetitive cuts with minimal carriage overtravel, saving time.
- Stainless steel water tray catches cooling water and debris for long life and easy cleaning.
- Fixed positions and reference blocks allow users to easily obtain exact dimensions of the most common international standards. Additional dimensions can be obtained using the integrated ruler.
- When the doors are open, an automatic break slows down the blade to ensure the safety of the operator.
- Compressed air gun for cleaning specimens and sawing system.
- Easy set-up including carriage speed and retraction sequence with intuitive touch screen display. Separate carriage speeds can be set and adjusted during operation for cutting and retraction sequence.
- Dynamic braking for rapid stopping when system is switched off.
Description
IPC Global’s new and improved Autosaw2 is a second generation fully automated asphalt saw with integrated clamping system. The Autosaw2 allows for fast and accurate cutting of rectangular beams, trapezoidal prisms, overlay test specimens, semi-circular specimens, and trimming of cylindrical specimens.
Easy Operation
The intelligent touch screen control, integrated rulers and reference blocks provide fast and effortless sawing of asphalt specimens.
Clean and Safe
Integrated protection cabinet, stainless steel water tray and interlock system ensure unparalleled safety & cleanliness in laboratory environments.
Superior Cutting
A powerful motor, adjustable automatic advance & retraction of the saw blade and adjustable limit switches ensure efficient specimen preparation.
Automated Sawing System
Fully automated, the system allows users to load their asphalt samples, input their desired settings and continue on with other tasks saving valuable working hours.
Accurate Specimen Preparation
Optional jigs, pneumatic clamping, reference blocks and integrated rulers allow users to easily obtain exact dimensions of the most common international test standards.
Endless Possibilities
Easy to use reference blocks, jigs, and pneumatic clamping systems allow the system to be easily upgraded to suit the cutting requirements for any future testing standards.
Technical Specification
| Blade diameter | 650 mm |
| Max cutting depth | 200 mm |
| Cores* | 100, 150 or 200 mm dia. |
| Prism length* | Max 500 mm |
| Accuracy | Length, perpendicularity and flatness +/-1% max., according to Standards |
| Blade speed | 1400-1680 rpm (50/60 Hz) |
| Blade traverse | 0-200 mm/min (variable speed) |
| Blade retraction traverse | 0-999 mm/min (variable speed) |
| Air supply for clamping | 700 kPa min |
| Cutting advancement | Automatic speed control with variable stop and retract control sensors |
| Cooling | Water recirculation pump and stainless steel tank (included) |
| Power supply | 5 kW |
| Voltage | 400 V, 50 Hz, 3 ph or 220 V, 60 Hz, 3 ph |
| Dimensions (l x w x h) | 2000 x 800 x 1700 mm |
| Weight approx. | 650 kg |
* Models suitable for cores 38 to 200 mm dia. and prisms up to 700 mm, available on request
Ordering Information
| 77-PV47105 | AUTOSAW II, Automated universal asphalt saw, complete with asphalt multi-slab jig and protection cabinet. Blade not included. 400V/50-60Hz/3ph+N |
Accessories
| 77-PV47000/1 | Diamond blade 650mm dia. for asphalt, suitable forAutosaw II and Multisaw |
| 77-PV47000/2 | Sacrificial PVC tube for 100mm dia. cores |
| 77-PV47011 | Universal jig for cores, for AUTOSAW II models only, to automatically perform single or double parallel cut on cores (100 or 150 mm dia., 10 to 200mm length), or manual cut on cores with diameter between 100 and 150 mm, 10 to 300 mm length |
| 77-PV47014 | Jig for round cores, from 38 to 200 mm dia, for Manual cut of samples from 10 to 300 mm length |
| 77-PV47020 | Jig for trapezoidal specimens, to be used in Two Point Bend test according to EN 12697-24A and 26A |
| 77-PV47025 | Jig for Wheel Tracking cores,Semi-Circular Bend test samples (except the notch) and Disk Shaped Compact Tension samples(except the notch and two holes). 77-PV47011 or 77-PV47014 are required. |
| 77-PV47030 | Jig for Overlay test samples according to TX-248-F(77-PV47011 or 77-PV47014 required) |
