Description:
This high stiffness flexural frame has been designed to have a double testing mode, parallel and orthogonal.
Parallel mode is meant to be used for displacement controlled testing on advanced construction materials, e.g. fiber reinforced concrete (FRC) and sprayed concrete.
These tests are significantly affected by the actual frame stiffness (set at 200 kN/mm by the relevant international Standards). Our model exceeds the Standards requirement with its 350 kN/mm capacity thanks to its specific layout which keeps the specimen aligned with the frame crossbeams, making most of its structural rigidity.
This remarkable result comes from the frame sections but it is also derived from the particular layout which keeps the specimen aligned with the frame crossbeams maximizing structural rigidity.
Orthogonal mode is meant to be used to test long specimens having more than 880mm length.
The horizontal daylight accommodates large specimens (slab, flagstones), concrete beams and kerbs long up to 880 mm.
The frame is fitted with high precision load cell (recommended for FRC testing), with piston travel limit switch and connection kit to the control console. Bearers not included. Please see accessories.
Bearers not included. Please see accessories.
Frames includes two rulers, two additional rulers are available on request. Rulers with graduations in inches are available on request.
Main Features
- High rigidity (350 kN/mm), especially suitable for testing FRC and sprayed concrete
- Double testing mode: parallel and orthogonal
- For testing different kinds of specimens (beams, flagstones, slab)
- Suitable for testing Round panel dia.800 mm to ASTM C1550
- Max span between lower rollers: 1.5m
- Load measurement by high precision load cell
- Piston return by counterweights
- Piston travel limit switch included
Technical Specs:
Models | 50-C1701/FR | |
DUPLEX | ||
Max cap. kN | 350 | |
Load sensor | Load cell | |
Horizontal clearance [mm] | 900 | |
Max. vertical clearance [mm]* | with 50-C1700/1 | 260 |
with 50-C1500/2 | 180 | |
with 50-C1500/2 + 50-C1500/3 | 245 | |
with 50-C1500/2 + 50-C1700/4 | 215 | |
with 50-C1500/6 | 165 | |
with 50-C1500/7 | 405 | |
with 50-C1700/7 | 100 | |
Distance between upper rollers (adjustable) mm | From 100 to 500, or single roller | |
Distance between lower rollers – Parallel testing mode (adjustable) mm | From 150 to 800 | |
Distance between lower rollers – Orthogonal testing mode (adjustable) mm | From 850 to 1500 | |
Piston travel mm | 130 | |
Overall dimensions (lxwxh) mm | 1150x 1600 x 1550 | |
Weight approx. kg | 520 |
* The vertical daylight can be reduced by using the distance pieces already included useful to reduce the daylight by: 50mm, 100mm and 150mm. Additional distance pieces are available as Accessories.
Accessories:
50-C1700/1
Upper and lower rollers for centre and third point test of concrete beams up to 300mm height, conforming to EN 12390-5 and ASTM C78, C1609, C1018, EN 14488-3, EN 14651.
Bearers dimensions: 30 mm dia. x 310 mm long
Weight approx: 40 kg
50-C1500/2
Set of one upper and two lower roller assembly for testing paving flags, conforming to EN 1339
Bearers dimensions: 40 mm dia. x 620 mm long
Weight approx: 45 kg
50-C1500/3
Swivel jointed loading pad for testing kerbs, conforming to EN 1340. To be used with support bearers of 50-C1500/2.
Weight approx: 5 kg
50-C1700/4
Upper loading rollers to perform the third point and centre point flexure test to EN 12390-5, including two rollers 310 mm long, 40 mm diameter. To be used with support bearers of 50-C1500/2
Weight approx.: 23 kg
50-C1500/5
Auxiliary testing frame for the measurement of deflection of FRC beams to EN 14488-3, 14651, ASTM C1609.
50-C1500/6
Accessory for testing sprayed concrete slab to EN 14488-5. Including supporting square base and spherically seated loading element. To be completed with displacement transducers 50-C1500/9 and 50-C1500/8.
Weight approx: 100 kg
50-C1700/7
Accessory for testing FRC concrete round slab to ASTM C1550. Including 3-points supporting base and spherically seated loading element. To be completed with displacement transducers 50-C1500/9 and 50-C1500/8.
Weight approx: 100 kg
50-C1500/7
Set of lower platen and upper platen spherically seated, 165 mm dia., for compression tests on small and low strength specimens.
Weight approx: 19 kg
50-C1500/8
Displacement transducer with 50mm travel for reading displacement of sprayed concrete slab centre under concentrated load.
50-C1500/9
100mm displacement transducer for measuring the piston travel. Complete with attachments.
Weight approx: 1 kg
50-C1500/50
Distance piece 50mm thickness for flexure frame
50-C1500/80
Distance piece 80mm thickness for flexure frame
50-C1700/R2
Rulers with graduation in inches