Standard Triaxial System with Built-in digital Data Acquisition

Standard triaxial System with built-in data acquisition is the ideal compact solution for performing standard triaxial tests such as effective and total stress.

Description

Standard triaxial System with built-in data acquisition is the ideal compact solution for performing standard triaxial tests such as effective and total stress. .

A typical standard triaxial system with built-in acquisition measurement includes:

Load frame with four built-in channels:
– TRIAX specifically designed for triaxial applications and is ideal for commercial laboratories that need a versatile machine capable of performing a wide range of tests. (Max sample sizes: 70 mm)
– TRITECH 50 kN or 100 kN: TRITECH original high-performance load frames for triaxial tests, ideal solution for advanced and research laboratories to perform high quality tests at .

Triaxial cell with accessories: 
– Standard triaxial cell with dedicated accessories for performing and preparing sample form 35 mm to 100 mm diameter.
– Banded triaxial cell with dedicated accessories for performing and preparing sample from 38 to 150 mm diameter.

Digital measuring system: Data acquisition is included in the load frame; four channels are available for load, displacement, pore pressure and volume change. If Hydromatic standalone pressure unit is selected, a separate volume change device is not required.

Pressure system:
– Hydromatic standalone pressure/volume controller, water pressure source and volume change controller for cell and back pressure.
– Air/water interface with air compressor and air filter

Template for data processing and reporting:  geotechnical Geo-Analysis-Templates suitable for real time data processing and printout of test certificates according to the most important international Standards.

More than 300 system configurations are available depending on type of test, sample size, pressure system. Please contact us for a complete offer.

Main Features

  • On-board (via USB) automatic data acquisition for all the sensors required (vertical displacement, axial force, cell pressure, back pressure, pore pressure, volume change); 
  • User friendly 6” touch screen colour panel for local control of load frame and monitoring of the four channels in real time;
  • PC not strictly required for test management: tests can be easily managed from the 6” touch screen;
  • Compact configuration with small footprint;
  • Additional control mode, including machine and data acquisition via remote PC and software;
  • Additional package for data processing and reporting, fully compliant with ASTM and BS standards

Additional features with Hydromatic Standalone solution:

  • Easier installation and saving space: compressed air apparatus, control panels and ancillary air/water systems no longer required;
  • Closed loop automatic control and management of cell and back pressure;
  • User friendly 6” touch screen colour panel for local control of pressure and measurement in real time of pressure and volume change;
  • Ergonomic and versatile support of the control panel to be adjusted according the user’s preferences.

Specifications

  • Capacity: 50 kN and 100 kN
  • Speed range: 0.00001 – 99.99999 mm/min (TRITECH) or 0.00001 – 50.8 mm/min (TRIAX)
  • Working pressures: 3500 or 1700 kPa (HYDROMATIC) or 1000 kPa (AIR/WATER INTERFACE and TRIAXIAL PANEL)
  • Specimen range: 35,38,50,70,100 mm (STANDARD TRIAXIAL CELL) or 35,38,50,70,100,150 mm (BANDED TRIAXIAL CELL)
  • Load frame touch screen: resolution 640×480 pixel; 65K colours; Contrast ratio 250: 1
  • Pressure/volume controller touch screen: resolution 640×480 pixel; 65K colours; Contrast ratio 250: 1
  • Effective resolution: 131000 points
  • USB port
  • LAN communication
  • Sampling rate: 50 readings per second

 

    You may also like…