Research Ductilometer for Force Ductility test on standard and modified bitumen – DUCTIMETER

Main Features

  • Conforms to Test Standards: EN 13398 | ASTM D113 | AASHTO T51 | EN 13589 | EN 13703 | ASTM D6084 | AASHTO T300
  • 4 tension line (briquette capacity) x 1500 mm
  • Easy and free access to the large testing space
  • Double drive screw rod
  • Closed-loop PID temperature control system
  • Stainless steel insulated water bath
  • Exclusive in-built thermoregulation system compensating the control, optimized by the connection to chiller (optional)
  • High carriage return speed of 500 mm/min for greater productivity
  • Adjustable speed range from 1 to 200 mm
  • PC-controlled using dedicated software
  • Includes a system for measuring forces up to 4×500 N with load cells
  • Temperature range from -10 to 60°C
  • Elongation measurement by optical system
  • Real-time load and displacement graphics via PC
  • Includes a system for measuring forces up to 2000 N (4 x 500 N)
  • Extensive use of stainless steel for frame, cover and tank

Links: Brochure

Description

81-PV10C12 DUCTIMETER Research Ductility Testing machine, PC controlled, 4 briquettes capacity, 1500 mm carriage travel, adjustable testing speed from 1 to 200 mm/min, thermostatically controlled water bath from -10 to 60°C, force measurement facility up to 500 N per line. 230 V, 50-60 Hz, 1 ph.

The ductility test is performed for determining the ductility of bituminous materials by measuring the elongation before breaking when two ends of briquette specimens are pulled apart at a specified speed and temperature.

Water bath
Insulated stainless steel water bath with a heating system located over the entire base surface and a stainless steel cooling coil (for connection to water mains or chiller) distributed over the three side walls assuring temperature uniformity without water turbulence inside the bath. All parts in contact with water are made of stainless steel.

Carriage displacement
Double-screew rods and mobile carriage enable test speeds from 3 to 200 mm/min. The system also permits the fast return of the carriage at the end of the test (500 mm/min) to reduce dead time and increase productivity. The carriage return is automatic, manual intervention is not required.

Temperature control

  • A closed-loop PID system assures constant temperature from -10 to +60°C, with a water chiller (see accessories)
  • Stainless steel cooling coil
  • Plate-type base heaters give better temperature uniformity
  • The thermoregulation system is based on control of the heater (which increases the temperature of the bath) and the control of the flow rate of the cooling coil by an electro-valve. This important feature assures control of the temperature within strict limits and permits the use of suitable standard water chillers.

Load and elongation measurement
Automatic measurement of the elongation by an encoder. Includes a system for measuring forces up to 2000 N (4 x 500 N) with load cells (see accessories).

Testing software 

Selection of test parameters (speed, temperature etx.) by PC. The test temperature, however, can be set in advance using the control panel of the machine.

  • Test control by PC: Start-Stop-Carriage return
  • Specimen failure recognition
  • Real-time display of load/elongation graph with advanced visualization options (single or multi-graph)
  • Data acquisition and processing conforming to Standards
  • Function for multiple test data comparison
  • Storage of test data

Machine control
By PC (not included)

Water cooling
This model is proposed without a chiller for use with a suitable cooling system that could be available in the laboratory. It is important, however, that this unit is capable of delivering a flow rate of 6 litres/min, 1 bar, at the minimum temperature of 2°C.

See-through cover
Essential for better temperature control of the bath

Technical Specs

Models 81-PV10C12
81-PV10C14
Conforms to Standards   EN 13398
EN 13589
EN 13703
ASTM D113
ASTM D6084
AASHTO T51
AASHTO T300
Machine control by PC with dedicated software (PC not included)
Thermostatically controlled
water bath temperature
From -10 to 60°C with water chiller.
PID closed-loop control
Temperature control system Heater and cooling coil for connection to cold water or water chiller
Structure Extensive use of stainless steel for frame, tank, cooling coil and cover
Briquettes capacity 4
Max carriage travel 1500 mm
Testing speed Adjustable from 1 to 200 mm/min
Elongation measurement by Optical system
Max. load and tension load measurement 2000 N (4 x 500 N) by load cells
Tension load/elongation graph Real-time graphs by PC
Carriage return speed 500 mm/min
Power rating (approx.) 1200 W
Transparent cover Included
Overall dimensions (l x d x h) 2434 x 412 x 385 mm
Weight approx. 100 kg

 

Accessories

Ductility briquette molds
81-B0141 
Briquette mould conforming to EN 13398

81-B0141/A 
Briquette mould conforming to ASTM D6084 and EN 13589

81-B0141/B 
Briquette mould conforming to ASTM D113 and AASHTO T51

81-B0142  
Ductility mould plate

Water chillers
Pump water flow (maximum): 6 litres/min
Dimensions: 450 x 450 x 825 (w x d x h)
Weight: approx. 35 kg

81-PV1012 (for 81-PV10C12)
Water chiller, flow rate 6 litres/min, -20°C minimum temperature.
1200 W, 230 V, 50-60 Hz, 1 ph.

81-PV1014 (for 81-PV10C14)
Water chiller, flow rate 6 litres/min, -20°C minimum temperature.
1200 W, 110 V, 60 Hz, 1 ph.

Load cells
81-PV10020 
High precision strain gauge load cell 0-500 N cap.

Machine base
81-PV10010 
Support base for ductility machines, stainless steel table
Dimensions: 2370 x 600 x 670 mm
Weight: approx. 50 kg